Feel the quality
this is a subtitle
The SELECT board range is characterised by a dynamic pattern and average contrast intensity. The colour ranges from pale yellow to brown and features an intricate pattern of light and dark medullary rays of various sizes and lengths. Knot formations and light sapwood are permissible, but knots, crevices and wood damage must not appear on the wood.
Board without bevels
Standard dimensions of floorboard:
Width (A) = 110; 130 mm
Thickness (B) = 16 mm
Length (C) = 600-3000 mm
Wood: oak
Permissible deviations from the standard:
Width (A) ± 0,02 mm
Thickness (B) ± 0,1 mm
Length (C) ± 0,02 mm
Moisture 8 ± 4%
Board with bevels
Standard dimensions of floorboard:
Width (A) = 110; 130 mm
Thickness (B) = 16 mm
Length (C) = 600-3000 mm
Wood: oak
Permissible deviations from the standard:
Width (A) ± 0,02 mm
Thickness (B) ± 0,1 mm
Length (C) ± 0,02 mm
Moisture 8 ± 4%
Technical parameters
Wood: oak
Moisture: 8 + 2%, 8 – 2 %
Precision of dimensions:
– width and length up to 0.02 mm
– thickness up to 0.1 mm
– chipping and irregularities in the surface up to 0.2 mm
Class “SELECT”
Tangential, semi-radial and radial profile varied with various natural wood grains.
The wood features a contrasting pattern, most prominently visible in medullary rings. The colour of the wood ranges from pale yellow to brown Some boards may have small formations of knots up to 3 mm in diameter. Sapwood may occur, but must not cover more than 1/4 of the board width. Light and dark medullary rays of various sizes and directions may be visible. The size of annual rings in the wood grain is not limited.
There must be no
– Knots
– Visually perceptible crevices
– Cross fibre
– Damaged wood
